Firmware Update - Denon S-52 Owner's Manual

ENGLISH
DIMMER
FUNCTION ON/OFF <SOURCE>
<MUTE/SNOOZE> <Multi Jog/VOLUME>
< >
FUNCTION ON/OFF
[INTERNET RADIO],
[PC MUSIC], [iPod],
[RADIO], [CD],
[USB/AUX]
[DISPLAY]
ENTER
[ui]
About the button names in these explanations
< > : Buttons on the main unit
[ ]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Other
8 9
Make setting for computer language environment.
n PC Language
Select computer environment language.
[Selectable items]
ara chi (smpl) chi (trad) cze dan
ENTER
fre ger
por (BR)
n Default Language
Select the language you want to display Internet Radio
information.
[Selectable items]
English
Nederlandish
Network Information
Display network information.
[Items to be checked]
DHCP= On or Off
Gateway
[VOL df]
[MUTE]
8 , 9
DIMMER
dut eng
gre heb hun ita jpn kor nor pol
rus spa swe tur
German French Italian Spanish
Swedish
MAC Address IP Address Subnet Mask
SSID Key Default Key
Rhapsody Setting
Set or change Username and Password.
"Listening to Rhapsody" (v page 19)
n How to Enter Characters
1
<Multi Jog>
Either turn
letter to be inserted.
fin
2
Use 8 9 to choose the cursor position.
por
b Repeat operation 1.2.
3
Once you are finished inputting, press
d Firmware Update
Update the firmware.
Normally there is no need to use this function, aside from the cases
described below.
• The Firmware Update function is only used for updating the firmware
via the Internet, for example for the purpose of adding functions to
the S-52 in the future.
• Information regarding the Firmware Update function will b e
announced on the DENON web site each time related plans are
defined.
• A broadband connection to the Internet is required to use this
function (v page 12).
• Even with a broadband connection to the Internet, approximately
30 minutes is required for the updating procedure to be completed.
Once updating starts, normal operations on the S-52 cannot be
performed until updating is completed.
Furthermore, updating the firmware may reset the backup data for
the parameters, etc., set for the S-52.
NOTE
• Connection to the network and specific settings are required to
update the firmware. For details, see page 9, 12.
• Do not turn off the power until updating is completed.
• When updating firmware, the settings may be reset.
• When the update is complete, the display disappears or a final screen
message is displayed. When this happens, plug out the power cord,
and plug in again after a few seconds.
[ui]
or press to choose the
ENTER
.