Printer Settings - Citizen PD-24 User Manual

Printer Settings

Setting the Modes
Top Menu Sub Menu
Printer QR division mode
Settings
Image generation
speed *
System Low power time
settings
Link off *
Black mark
detection
Return control
Interface Interface selected
settings
Cable IF auto
detection
Cable IF baudrate
40
Initial values
mode 1
Normal
1
3 min
2 Invalid
Invalid
Invalid
IrDA
Bluetooth*
Valid
9600
Setting range Remarks
mode 1 Selects the QR Code
mode 2 separation function: Mode 1
where the user separates the
data and Mode 2 where the
printer separates the data.
Normal Selects image generation
Fast speed
3 min Sets the time until energy
5 min saving starts. Or it can be set
10 min to invalid.
Invalid
Invalid Function that cancels auto
Valid power off, during infrared
linking.
Invalid Sets black mark detection
Valid printing.
Invalid If this setting is valid, a
Valid response is sent to the FSg of
the ESC command and to the
ESC ˜ Y command (command to
return the status of the printer
to the host).
Bluetooth If the printer is a Bluetooth
Cable IF version, the Bluetooth interface
IrDA (Infrared Standard) is selected in the factory.
IrCZ (Infrared Citizen)
USB
Invalid When set to Valid, the serial
Valid interface will take priority when
the cable is connected and the
printer power is ON.
600, 1200 Selects communication speed.
2400, 4800 (Valid only for RS232C
9600, 19200 interface.)
38400, 57600
1 15200