Creating a New Quick-Memo
Use the procedures in this section to draw the figures you want in a Quick-Memo.
To input a new Quick-Memo
1. Enter the Quick-Memo Mode.
2. Tap the
save the Quick-Memo.
3. Use the drawing tools to draw the figure you want.
•
To clear all Quick-Memo screen contents, tap Clr.
4. After you are finished, tap Save to save the Quick-Memo.
•
If you want to input another Quick-Memo, tap New.
To draw a freehand line
1. Use the line tool
2. Drag the stylus on the display to draw the line you want.
(category) button to select the category where you want to
to select freehand.
Chapter 6 Quick-Memo
89