Setting The Picture Size - Sansui HDLCD3700 Owner's Manual

You can view 480i and 480p format
programs in a variety of picture
sizes—NATURAL, CINEMA WIDE1,
CINEMA WIDE2, CINEMA WIDE3,
and FULL.
NOTE:
Some High Definition and/or Digital
broadcasts may not allow you to
change the picture size.

Setting the picture size

Selecting the picture size
1
Press MENU. Press
select (SETUP) menu.
Press ▲ or ▼ to select
"PICTURE SIZE".
2
Press or . The PICTURE
SIZE menu will appear. Press
▲/ ▼ or a Number button (0-4)
to select the desired picture size,
as described below and on the
next page.
3
Press EXIT to return to the normal screen.
NOTE:
You can also display the PICTURE SIZE menu by pressing the
PICTURE SIZE button on the remote control.
NATURAL picture size
In some cases, this image will display the size of standard 4:3 with
a gray side bar.
CINEMA WIDE1 picture size (for 4:3 format programs)
To fill the screen, the right and left edges are extended,
however; the center of the picture remains near its former ratio.
The top and bottom edges of the picture may be hidden.
or to
SETUP
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE
ASPECT
SIGNAL METER
AUTO SHUT OFF
:SELECT
P I C T U R E S I Z E
0 : N AT U R A L
1 : C I N E M A W I D E 1
2 : C I N E M A W I D E 2
3 : C I N E M A W I D E 3
4 : F U L L
[ 0 - 4 ] : S E L E C T
FILM
OFF
OFF
:ADJUST
29