Memorizing Channels - Sansui HDLCD3700 Owner's Manual

Memorizing channels

This TV is equipped with a channel memory feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted channels. Before selecting channels, they must
be programmed into the TV's memory. To use this TV with an antenna, set the TV/CABLE menu option to
the TV mode. When shipped from the factory, this menu option is in the CABLE mode.
NOTE:
It may take a few seconds for a
digital channel picture to appear on
screen after being selected.
18
TV/CABLE selection
1
Press MENU. The menu screen will appear.
2
Press or to select
(SETUP) menu.
3
Press ▲ or ▼ to select
"TV/CABLE".
4
Press or to select
"TV" or "CABLE".
TV
- VHF/UHF channels
CABLE
- CABLE TV channels
5
Press EXIT to return to the normal screen.
CABLE CHART
The chart below is typical of many cable system channel allocations.
SETUP
LANGUAGE ENGLISH
TV/CABLE CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT :ADJUST
SETUP
LANGUAGE ENGLISH
TV/CABLE TV/ CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT :ADJUST
SETUP
LANGUAGE ENGLISH
TV/CABLE TV/CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT :ADJUST