Remote Control - Sansui HDPDP4200A Owner's Manual

Remote control

* You can use these buttons to operate
your VCR, Cable/Satellite box or DVD
after you have programmed the re-
mote control for the code that oper-
ates your VCR, Cable/Satellite box or
DVD (see page 10 and 11).
1. PLASMA DISPLAY, VCR, CABLE, DVD POWER
Button* - Used to turn the Plasma Display, VCR,
Cable/Satellite box or DVD on or off after you select
the operating mode on step 9.
2. SLEEP Button - To set the Plasma Display to turn
off after a preset amount of time, use the SLEEP
button on the remote control.
3. Direct Channel Selection Buttons (0-9)* - Allows
direct access to any channel of the VCR, Cable/
Satellite box or DVD.
4. CH (CHANNEL)/CURSOR
operate the menu functions of the Plasma Display,
and to change the channels of a Cable/Satellite box.
5. MENU Button - Use to display the On-Screen menu
function.
6. RESET Button - Press to reset the On-Screen
picture adjustments to their factory preset positions.
7. CLOSED CAPTION Button - Press this button to
switch between normal mode and the two Closed
Caption modes (captions and 1/2 of full screen text).
Closed Captioning will display text on screen for
hearing impaired viewers.
8. CODE SET Button - Used to register the 2-digit
codes to operate your VCR or Cable/Satellite box.
Press this button and the VCR button or the CABLE
button simultaneously to start a registration (See
page 10).
9. TV, VCR, CABLE, DVD Selector Buttons - Press to
select the Plasma Display, VCR, Cable/Satellite box
or DVD to be operated.
8
1
2
3
4
5
6
7
8
9
10
/ Buttons* - Used to
11
12
13
14
15
16
17
18
19
20
10. VCR Operation Buttons* - Press to operate your
VCR if programmed properly using a code listed on
page 10.
11. DISPLAY Button - When you press this button, the
input source will appear on the lower right corner of
the screen. Press the button again to remove display
from the screen.
12. MUTE Button - To turn off the sound, press this
button once. The Plasma Display will be silenced and
the symbol "MUTE" will appear on the screen. The
muting feature can be released by pressing the
MUTE button again or one of the VOL (VOLUME) +
or – buttons.
13. QUICK VIEW Button - This button allows you to go
back to the previous input source selected by just
pressing the QUICK VIEW button. Press this button
again to return to the channel you were watching.
14. +10/CH ENTER Button* - Some connected equip-
ment such as a Cable/Satellite box, VCR, or DVD
may require this button to input selected channels.
15. VOL (VOLUME) + / – Buttons - Press the
to increase, or the
level.
16. ENTER Button - Use to enter or select information
for On-Screen operations.
17. EXIT Button - Press to remove setup menu.
18. INPUT SELECT Button - Press to display SOURCE
SELECTION menu.
19. PICTURE SIZE Button - Press to display PICTURE
SIZE menu.
20. DVD Operation Buttons* - Press to operate your
DVD if programmed properly using a code listed on
page 10.
button to decrease the sound
button