Viewing The Connection Panel - Samsung 4 series User Manual

Viewing the Connection Panel

¦
Power Input
The product colour and shape may vary depending on the model.
N
1 AUDIO OUT [R-AUDIO-L]
– Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding
audio in connectors on the Amplifier or DVD Home Theatre.
2 HDMI IN (DVI), 
Connects to the HDMI jack of a device with an HDMI output.
No additional Audio connection is needed for an HDMI to HDMI connection.
N
What is HDMI?
N
● HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable.
● The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature installed.
Use the HDMI IN (DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
N
(DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable
connection, you must use the HDMI IN (DVI) jack.
3 PC/DVI AUDIO IN
– Connect to the audio output jack on your PC.
– DVI audio outputs for external devices.
4 FM ANT
– Connect to the FM radio antenna.
Do not connect an RF antenna to FM ANT terminal.
Connect through the supplied FM Radio antenna.
N
When using another antenna besides the supplied antenna, make sure to use 75Ω FM Radio antenna.
N
Adjust the antenna to fine position to receive the radio signal.
N
5 PC IN
– Connect to the video output jack on your PC.
If your PC supports an HDMI connection, you can connect this to the HDMI IN  (DVI) or  terminal.
N
If your PC supports a DVI connection, you can connect this to the HDMI IN  (DVI) / PC/DVI AUDIO IN terminal.
N
6 SERVICE
– Connector for service only.
7 ANT IN
– Connects to an antenna or cable TV system.
[TV Rear Panel]
1 2
@ !
English - 
3 4 5 6
0 9
8 7