Advanced Adjustments & Optional Settings - Bunn Trifecta Installation & Operating Manual

LEVEL "2"
Press and hold both arrows until display reads "RECIPE
CHANGES" "ENABLED - LOCKED".
RECIPE CHANGES
1.
ENABLED
Press to "ENABLE" adjustment, or
Press "SELECT" to advance to next screen.
ChangeRecipeName
2.
NO
A
CHANGE
B
ADD RECIPE NAME?
3.
NO
ADVANCED ADJUSTMENTS & OPTIONAL SETTINGS
LOCKED
to "LOCK".
YES
HOUSE SPECIAL
NEXT
DECAF
_ HOUSE SPECIAL
YES
PROGRAM MODE DEFAULT
1. Perform Deep Clean?
2. Recipe Changes
3. Change Recipe Name
4. Add Recipe Name
5. Delete Recipe Name
6. Set Language
7. Units
8. Base Temperature
9. Brew Lockout
10. Ready Degrees
11. 1st Rinse Air On
12. 2nd Rinse Air On
13. 2nd Rinse Time
14. Rinse Air Power
15. Brew Count
16. Brew Count
17. Enter Service #
18. Service Tools
19. Factory Defaults
By default "ENABLED" will be flashing to indicate that the
brewing parameters may be accessed/changed. Selecting
"LOCKED" will prevent changes to the brewing param-
eters, but can still be accessed for viewing.
Select "YES" to change/modify a recipe's name. Select "NO"
to advance to "ADD RECIPE NAME".
"CHANGE" will advance to next screen to modify the name
that is displayed. "NEXT" advances to the next recipe name
that has been programmed into memory. Default is "HOUSE
SPECIAL" & "DECAF" only.
Use the UP/DOWN buttons to scroll through alpha/numeric
digit for that position. Use the
to the next digit to the right. Press the
to the left. Once you are finished changing the name, scroll
all the way to the right to advance to next screen.
Allows you to add additional names to the default list.
Select "YES"
Page 13
RANGE
- -
Enabled Enabled/Locked
Eng English/Spanish/French
English English/Metric
Disabled Enabled/ Disabled
Yes YES/NO
5°F below "SET" temp
OFF OFF/1-60
60 OFF/1-60
2.0 OFF/1-4.0
7 OFF/1-7
Total (Non reset-able)
Total (Reset-able)
button to move curser
to move curser
42822.1 050412