Whirlpool WFW86HEBW Use And Care Manual page 12

USING YOUR WASHER
12.
ouch and hold START to begin
T
wash cycle
Touch and hold START to start the wash cycle. To pause a
cycle in progress, touch START once, then touch and hold
again to continue the cycle. To cancel a cycle, touch POWER.
Once you touch and hold START, you will hear the door lock,
unlock, and lock again. The washer door will remain locked
during the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2
missed garments, you may do so while the
"Add Garment" light is lit.
Touch START once; the door will unlock
once the washer movement has stopped.
This may take several minutes. Then close
door and touch and hold START again to
restart the cycle.
12
13.
Remove garments promptly
after cycle is finished
Promptly remove garments after cycle has
completed to avoid odor and rusting of
metal objects on garments. When unloading
garments, pull back the door seal and check
for small items between the tub and the washer drum.
If you will be unable to remove the load
promptly, use the TumbleFresh
If selected, the TumbleFresh ™
tumble the load periodically for up to 6 hours.
To turn off the TumbleFresh
™
washer so that the TumbleFresh
future cycles, touch TumbleFresh.
NOTE:
The door will remain locked while the TumbleFresh
n
is active. To cancel the option and unlock the door, touch
POWER.
n A small amount of water may remain in the dispensers after
the wash cycle is complete. This is normal.
n This washer has a tight seal to avoid water leaks. To avoid
odors, leave the door open to allow the washer to dry
between uses.
OR
option.
™
option will
option, touch POWER. To set the
option does not come on for
™
option
™