Mass Storage Device Guide Rails - HP Kayak XU800 Service Handbook

1
HP Kayak XU800 PC Workstation

Mass Storage Device Guide Rails

Attached on the side of the front access cage, additional guide rails are available
for mass storage device installations. Depending on the device to be installed,
dedicated guide rails are required and are easily recognized by their distinct size
and color.
The following table indicates the device, location, and required rails.
Device to be
Installed
3.5-inch device
(hard disk drive)
5.25-inch device
(CD-ROM, etc.)
Third 3.5-inch hard disk
drive
3.5-inch device
(zip drive
1-14 HP Kayak XU800 PC Workstation
Location Required
Rails
3.5-inch Short blue left
internal and right rails
shelf (two
shelves)
5.25-inch Long green rails There is no specific side to
front
access
cage shelf
Short green left
and right rails
Installing the Rails
Insert the guide rail labeled "L"
on the left-hand side (cable
connectors facing towards you
and positioned at the bottom),
and the guide rail "R" on the
right-hand side of the hard disk
drive.
which these guides must be
installed. However, they must
be inserted in the two holes
located at the bottom of the
drive.
Hard disk drive is mounted on
the pre-installed 5.25-inch
hard disk drive tray and
secured to the tray using the
supplied four screws.
Carefully break off the metal
plate from the chassis. Insert
the guide rail labeled "L" on
the left-hand side (cable
connectors facing towards you
and positioned at the top), and
the guide rail "R" on the right-
hand side of the hard disk
drive.
Minitower
PC Workstations