System Board Switches - HP Kayak XU 03xx Technical Information

HP Kayak XU 03xx PC Workstation Technical Information
System Connectors and Switches

System Board Switches

Switches 1 through 5 are used for processor settings and should not be
changed. Replacing the processor with a different processor is not
supported by HP. Switches 6 to 10 are used as shown in the following
table:
1
Switch
Use Switch to:
6 - CLEAR CMOS Retain or clear CMOS memory:
•
•
7 - PSWRD Enable or clear (and disable) User and System Administrator Passwords
stored in EEPROM:
•
•
8 - KEYB power on Enable or disable power on using the keyboard:
•
•
9 - BOX DEFINITION Select box type:
•
•
10 - BIOS Recovery •
Mode •
1. On the switch, UP=OFF and DOWN=ON.
12 English
UP to retain CMOS memory — DEFAULT
DOWN to clear CMOS memory.
UP to enable passwords — DEFAULT
DOWN to clear passwords.
UP to disable keyboard power on
DOWN to enable keyboard power on — DEFAULT.
UP to select a Mini Tower model — DEFAULT.
DOWN to select a Desktop model.
UP to enable normal mode — DEFAULT.
DOWN to enable recovery mode.
System Board
Switches