Connecting Audio Accessories - HP Kayak XA-s 02xx Manual

Hp kayak xa-s series 02xx, installing , connecting & setting up guide for minitower models
Hide thumbs Also See for Kayak XA-s 02xx:
Table of Contents

Advertisement

Audio Front Panel
WARNING
HP Kayak XA-s 02xx PC Workstation - Setting Up and Using Your HP Minitower PC Workstation

Connecting Audio Accessories

Connecting Audio Accessories
Your PC Workstation has a Headphone Out jack and a Microphone In
jack on the Audio Front Panel. A LINE IN jack, LINE OUT jack, MIC IN
jack, and MIDI/Joystick connector are located on the rear panel.
MIDI/Joystick
connector
LINE IN jack
To avoid discomfort from unexpected noise or static, always turn
down the volume before connecting headphones or speakers.
Listening to loud sounds for prolonged periods may permanently
damage your hearing.
Before putting on headphones, place them around your neck and turn
down the volume. When you put on the headphones, slowly increase
the volume until you find a comfortable listening level, then leave the
volume control in that position.
4
English
LINE OUT jack
NOTE
The internal speaker and LINE OUT
MIC IN
jack on the rear panel of your
jack
PC Workstation are deactivated
when you use the Headphones jack
on the Audio Front Panel.
The internal speaker is deactivated
when you use the LINE OUT jack.
External speakers you connect
should have a built-in power
supply.
The audio accessories shown
here (microphone, speakers, and
audio system) are not supplied
with your PC Workstation.
Volume can be controlled through
the HP enhanced keyboard or the
software volume control.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kayak xa-s 02 series

Table of Contents