HP Kayak XA-s 02xx Manual page 16

HP Kayak XA-s 02xx PC Workstation - Setting Up and Using Your HP Minitower PC Workstation
Configuring Your Network Connection
Controlling the Network Security Features
The Security Features allow you to enable starting from the network if
you want the PC Workstation to start from a LAN server.
To enable starting from the network:
1 With the Setup program running, use the
the Security menu.
2 Press to highlight the line Boot Devices Security and press
to select the submenu.
3 Highlight the line Start from Network and press
change the option to Enabled.
4 You can disable the other boot options to prevent the PC
Workstation from booting if the network or server ever fails:
a Press to go to the Start From Floppy line. Press
to change the option to Disabled.
b Press to go to the Start From IDE CD-ROM line. Press
or to change the option to Disabled.
c Press to go to the Start From IDE HDD line. Press
to change the option to Disabled.
5 Save your changes and exit.
Selecting the Boot Device Priority
You can determine the order in which your PC Workstation looks for
boot devices, including boot devices on the network. To do this:
1 With the Setup program running, use the
the Boot menu.
2 Press to highlight the line Boot Device Priority and press
to select the submenu.
3 Use the and
the or key to move the device up or down the list.
You can also change the boot device order without entering Setup.
Look for the prompting message when your PC Workstation first starts
up after re-booting.
16 English
keys to select a boot device, and then press
or key to select
or to
or
or
or key to select