For The Installer; Warnings; Technical Characteristics - Zanussi TSE 1062 V Instruction Manual

Top-loading washing machine
Hide thumbs Also See for TSE 1062 V:
Table of Contents

Advertisement

B. FOR THE INSTALLER

1. WARNINGS

This washing machine is heavy. Take care when
moving it.
You must remove the packing on the washing machine
before use. Failure to remove all transport protection
devices can cause damage to the washing machine or
nearby furniture.
unplugged while packing is being removed.
Do not allow any one other than a qualified plumber to
make the hydraulic connections necessary to install
your washing machine.
The washing machine must be plugged in to a power
outlet with a conform earth.
Call a qualified electrician if the electrical installation in
your residence is such that you have to modify it before
you can connect your washing machine.

2. TECHNICAL CHARACTERISTICS

DIMENSIONS
VOLTAGE / FREQUENCY
TOTAL POWER
WATER PRESSURE
Connection to the water network
This washing machine complies with CEE directive 89-336 about the limitation of radioelectric disturbances
and directive CEE 73-23 for electrical safety.
The washing machine must be
Height
Width
Depth
Minimum
Maximum
Please read the instructions in the "electrical connec-
tions" chapter carefully before connecting your
washing machine.
After installing your washing machine, make sure that
it is not standing on its electrical power supply cable.
When your machine is installed on a carpeted floor,
make sure that the carpet does not close off the venti-
lation openings near the bottom of the machine.
The power supply cable may be only replaced by the
After Sales Service.
Your manufacturer cannot be held responsible for any
damage resulting from a nonconform installation.
850 mm
400 mm
600 mm
230 V / 50 Hz
2300 W
0,05 MPa (0,5 bar)
0,8 MPa (8 bars)
Type 20x27
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tse 1262 v

Table of Contents