G
Camera server addition error [01]
Message
Cause
Solution
G
Camera server addition error [02]
Message
Cause
Solution
G
Camera server addition error [03]
Message
Cause
Solution
64
The specified camera server network address could not be found.
Check that the camera server network address was entered correctly. Alternatively,
check that the DNS is set correctly for the PC on which MV Manager is installed.
A time-out occurred during connection.
Check that the camera server network address was entered correctly. Check
also that the camera server is switched on and that the camera server is
connected to the network correctly.
Camera server information retrieval failed.
Check that you are using a camera server that can be used with WebView Livescope
MV. Check also that the network address was entered correctly and that the camera
server is connected to the network correctly.