Buffalo AirStation Nfiniti WZR-HP-G300NH User Manual page 17

Chapter 3 Installation
5
Connect your computer to one of the AirStation's LAN ports with the LAN cable.
6
Turn on the AirStation, wait one minute, and then turn on your computer.
power outlet
7
Once your computer has booted, the AirStation's LEDs should be lit as described below:
POWER
WIRELESS
ROUTER
DIAG
LAN
INTERNET
For LED locations, refer to chapter 1.
8
Launch a web browser. If the [home] setup screen is displayed, setup is complete.
If a user name and password screen is displayed, enter [root] (in lower case) for the user
name, leave the password blank, and click [OK]. Step through the wizard to complete setup.
You've completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
WZR-HP-G300NH User Manual
Wireless Router
1) connect
Wireless Router
(rear side)
1) Connect the power supply
Green light on.
Green light on or blinking.
Green light on or off depending on your network.
Off
Green light on or blinking.
Green light on or blinking.
OFF
2) connect
computer
LAN cable
16