Lenovo ThinkCentre Edge 91z Hardware Maintenance Manual page 81

Machine types: 1732, 1734, 1736, 7074, 7075, 7077, 7078, 7556, and 7559
Hide thumbs Also See for ThinkCentre Edge 91z:
Table of Contents

Advertisement

Diagnostic Error Code
080-197-XXX Game Port interface test warning
080-198-XXX Game Port interface test aborted
080-199-XXX Game Port interface test failed, cause
unknown
086-000-XXX Mouse Port interface Test Passed
086-001-XXX Mouse Port interface Presence
086-032-XXX Mouse Port interface Device controller failure
086-035-XXX Mouse Port interface Reset
086-040-XXX Mouse Port interface IRQ failure
086-195-XXX Mouse Port interface Test aborted by user
086-196-XXX Mouse Port interface test halt, error
threshold exceeded
086-197-XXX Mouse Port interface test warning
086-198-XXX Mouse Port interface test aborted
FRU/Action
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 "Using
the Setup Utility program" on page 57.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 "Using
the Setup Utility program" on page 57
2. Flash the system and re-test. See "Flash update
procedures" on page 217.
3. Go to "Undetermined problems" on page 82.
1. See "Undetermined problems" on page 82.
2. Flash the system and re-test. See "Flash update
procedures" on page 217.
3. Replace component under function test.
No action
1. Mouse
2. System board
1. Mouse
2. System board
1. Mouse
2. System board
1. Run the Setup Utility program.
2. Mouse
3. System board
Information only Restart the test, if necessary.
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 "Using
the Setup Utility program" on page 57.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 "Using
the Setup Utility program" on page 57.
2. Flash the system and re-test. See "Flash update
procedures" on page 217.
3. Go to "Undetermined problems" on page 82.
Chapter 7
.
Symptom-to-FRU Index
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents