Table of Contents
Advertisement
24
Changing The Filters
REPLACING THE WATER FILTER
In general, you should change the water filter every six to nine months to ensure
highest possible water quality. The Filter Status light on the dispenser control
panel prompts you to replace the filter after 1514 liters of water has flowed through
the system.
If your refrigerator has not been used for a period of time (during moving for
example), change the filter before reinstalling the refrigerator.
NO
NOTE
NO
TE
TE
TE
NO
NO
TE
The ice and water system can also operate without filtration if you use a bypass in place
of the water filter cartridge. Please contact the Electrolux Customer Care Center to order the
bypass component (Part No. 240396701).
More About Your Advanced Water Filter
Standards 42 and 53. See the performance data sheet that came with your
product for detailed specifications.
This system should not be used on water that is microbiologically unsafe or with
water of unknown quality unless the water has been adequately disinfected before
or after traveling through the filtration system. NSF Test & Certification Results:
• Rated Capacity - 1514 liters
• Rated service flow - 1.9 liters per minute
• Maximum Rated Pressure - 6.9 bars
• Maximum Operating Temp. - 37.8° C
To replace the water filter:
It is not necessary to turn the water supply off to change the filter. Be ready to wipe
up any small amounts of water released during the filter replacement. The bottom
of the filter housing includes two small water drainage holes, so be sure to remove
any stored food from the top shelf.
NO
NO
NOTE
TE
TE
TE
NO
NO
TE
The o-rings on a new water filter are lubricated. To ensure a good seal, please do not
remove this lubricant.
The pure advantage
TM
System is tested and certified by NSF International, the nationally
respected, not-for-profit certification organization for public health
safety. The filter system is tested and certified to ANSI/NSF
or pure advantage
Ice & Water Filter
plus
Advertisement
Table of Contents
