Ink Suction Amount In The Cleaning Mode - Canon S600 Service Manual

Hide thumbs Also See for S600:
Table of Contents

Advertisement

S600

6. INK SUCTION AMOUNT IN THE CLEANING MODE

The printer has five cleaning modes (A to G). Cleaning is executed for maximum
effectiveness and efficiency. The cleaning operation is selected depending on the
respective condition. The ink suction operation differs depending on the condition at
three occasions: Operation by the user, cover open/closing, and before printing starts.
• Operation by the user: Manual ink suction (Including printer driver operation)
• Cover open/closing: Cleaning at printer arrival
• Before printing starts: Other than manual suction
Mode
Cleaning A
All colors
Bk
Cl
Cleaning D
All colors
Bk
Cl
Cleaning E
All colors
Cleaning F
All colors
Cleaning G
All colors
*1 If the preconditions overlap, the stronger suction will take priority.
Cleaning A < Cleaning D < Cleaning E < Cleaning F < Cleaning G
*2 In the case of the boxed preconditions, the suction starts right after the precondition
is executed. For other preconditions, suction is executed right before the printing
starts or during printing.
*3 Ink tank replacement is detected when the ink tank's status changes from H to L.
*4 Printing of EEPROM contents, etc., with the printer alone.
*5 Purging operations will be performed after 24 hours only the first 5 times, after which
purging will occur at 60 to 336 hours intervals.
Suction
Amount (g)
Bk Cl
0.15 0.36
Bk
0.15
Cl
0.36
Bk Cl
0.3 0.72
Bk
0.3
Cl
0.72
Bk Cl
0.45 0.72
Bk Cl
0.45 1.08
Bk Cl
1.5 1.08
When checking the functions of the purge unit, measure the suction
amount for a manual suction.
Precondition*
Dot count suction, Manual suction (All colors) *
timer suction (Time not set)*
Dot count suction, Manual suction (Bk) ,
timer suction (60*
~ 336 h)
5
Dot count suction, Manual suction (Cl) ,
timer suction (120 ~ 336 h)
Tank replacement*
3
(All colors)
Tank replacement*
3
Tank replacement*
3
Long timer suction (336 h ~)
When print head is replaced, at printer arrival
Head refreshing
3-23
Part 3: Technical Reference
4
after soft power ON
after soft power ON (Bk)
after soft power ON (Cl)
,
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

S500S630S630n

Table of Contents