Turning Off The Printer - Canon Satera LBP7700C User Manual

Turning Off the Printer

1
2
3
4
IMPORTANT
Do not turn the printer on immediately after turning it off.
If you want to cycle the power of the printer, wait at least 10 seconds before turning
it on again.
If an error message appears in the display on the control panel
See "Message List," on p. 129.
When turning on the printer for the first time after installing the printer and
paper feeder
Read the following instructions.

Do not load paper in the paper cassette.

Make sure that the packing materials of the paper cassette are removed.
Check that the printer is not performing the following
operations.

Printing

While the printer is running a self-diagnostic test immediately after turning the
power on

While the indicator is on

When any of the following messages appears
- < >
- <
- <Initializing NVRAM...>
Press [ ] (
Select [
IMPORTANT
If you perform a shutdown when a secured print job is in the hard disk
The message <
If you want to execute a shutdown, perform a soft reset to delete the job, and then
perform a shutdown again.
If you do not want to execute a shutdown, press [
>
).
] using [ ], and then press [OK].
> appears.
] ( ).