Service Mode - Canon S100 Service Manual

4. Service Mode

Function
Cleaning the BJ cartridge
Test print
1) Nozzle pattern
2) Service test print
Control ROM Version
Page throughput
Waste ink Amount
Destination setting
EEPROM Reset
(Reset waste ink amount)
Destination setting
(Japan/SP/Other)
*1 Service test print
-1 Without the cartridge installed, connect the AC power
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release.
-3 Open the front cover, install the BC-20 (black BJ cartridge) and set A4-sized paper.
-4 Double click the RESET button.
-5 Close the front cover.
-6 The printer starts service test printing.
*2 EEPROM reset / Destination setting
-1 Without the cartridge installed, connect the AC power
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release.
-3 Hold down the RESET button for 2 seconds or more and release.
-4 < EEPROM Reset >
Hold down the RESET button for 2 secs or more and release.
*3 Print sample of 'Service test print'
You can check the EEPROM settings by conducting a 'Service test print'.
Control ROM Version
Ver X.XX BC-20 Lost XX.X% Page count ->BK XXXX CL XXXX LD XXXX PaperCnt ->Nol XXXX Cad XXXX Res XXXX Gls XXXX Sel XXXX Otr XXXX
BJYYYYY PurgeCnt -> Time yyyy Dot yyyy Mnu yyyy Crg yyyy Wip yyyy Dry : OFF Purge Flag : yyyy Door : close USBSerialNo. Yyyy Fch : yy
Destination setting
Japan BJ S100
SP S100SP
Other S100
Procedure
Press and hold the RESET botton for 2 seconds or moreCleaning time
(while the AC cord is plugged in)
Double click the RESET button.
(while the AC cord is plugged in)
See *1 service test print'
See *2 EEPROM reset / Destination setting
See *2 EEPROM reset / Destination setting
Amount of waste ink
Page throughputs of BK: BC-20
< Destination setting >
-Japan
-SP
-Others
After the button is pressed, the carriage will move same
number of times as the RESET button is pressed.
CL: BC-21e
Remarks
:Approx.20seconds.)
Print nozzle check pattern
BC-20/21e
Needs BC-20
Print sample : See *3
Press the RESET button once.
Press the RESET button 3 times
Press the RESET button twice
Paper type
Other
Self print
Glossy paper
High resolution paper
Postcard
Plain paper