Service Mode - Canon S200 Simplified Service Manual

4. Service Mode

Function
Cleaning the BJ cartridge
<For reference>
Deep Cleaning
Paper feeding without printing
(For feeding cleaning sheet through the ASF.)
Test print
1) Nozzle pattern
<For reference>
Print Head Alignment
2) Service test print
Control ROM Version
Pages Per Cartridge
Waste ink Amount
Destination setting
EEPROM Reset
(Reset waste ink amount)
Destination setting
(Japan/SP/Others)
*1 Service test print
-1 Without the cartridge installed and with the front cover closed, connect the AC cord
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release it once more.
-3 Open the front cover and install the print head (QY6-0038-000) and set A4-sized paper.
-4 Press the RESET button 3 times in a row.
-5 Close the front cover.
-6 The printer starts service test printing.
*2 EEPROM reset / Destination setting
-1 Without the cartridge installed and with the front cover closed, connect the AC cord
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release it.
-3 Hold down the RESET button for 2 seconds or more and release it once more.
-4 < EEPROM Reset >
Hold down the RESET button for 2 secs or more
and release it.
*3 Print sample of 'Service test print'
You can check the EEPROM settings with a 'Service test print'. (See the first part of the 'Service test print.')
Control ROM Version
S200 Destination XX ROMVer X.XX Lost XX.X% CL XXXXX PaperCnt -> Nol XXXX Cad XXXX Res XXXX Gls XXXX Sel XXXX Otr XXXX
PurgeCnt -> Tim yyyyy Dot yyyyy Mnu yyyyy Crg yyyyy Wip yyyyyyk PurgeFlag: yyy Door: close USBSerialNo yyyyyy Fch: yy
Destination setting
Other
Japan
SP
Procedure
Press and hold the RESET button for 2 seconds or more
( while the AC cord is plugged in)
#Can be performed from the printer driver utility.
Select "Deep Cleaning" from the printer driver utility.
(It is necessary to connect the printer to the PC.)
Click the RESET button three times.
Double click the RESET button.
(while the AC cord is plugged in)
[1]
Select "Print Head Alignment" from the printer driver utility.
[2]
Select the optimal value using the printed head position
adjustment pattern. (It is necessary to connect the printer
to the PC.)
See *1 service test print
See *2 EEPROM reset / Destination setting
See *2 EEPROM reset / Destination setting
Waste ink Amount
Fed sheet count
01
02
03
< Destination setting >
-Japan Press the RESET button once.
-Others Press the RESET button twice
-SP Press the RESET button 3 times
After the button is pressed, the carriage will move
the same number of times as the RESET button was pressed.
Remarks
Cleaning time
:Approx.40seconds.
Cleaning time
:Approx.60seconds.
Perform paper feeding from the ASF
without printing.
Print nozzle check pattern
(Line misalignment check
pattern)
Significant misalignment
can be adjusted.
Print sample : See *3
Paper type
Other
Self print
Glossy paper
High resolution paper
Postcard
Plain paper