Lcd Panel Illumination - Canon EOS 7D Instruction Manual

Making Selections with the Quick Control Dial
5
Before using the <
You can do step (1) even when the Quick Control Dial switch is set to
<R>.
U LCD Panel Illumination
5 > dial, set the Quick Control Dial switch to <J>.
(1) After pressing a button, turn the
<5> dial.
When you press a button, its function
remains selected for 6 seconds (9).
During this time, you can turn the <
dial to set the desired setting.
When the function turns off or if you
press the shutter button halfway, the
camera will be ready to shoot.
Use this dial to select or set the white

balance, drive mode, flash exposure
compensation, AF point, etc.
Turn the <5> dial only.
(2)
While looking at the viewfinder or LCD
panel, turn the <
desired setting.
Use this dial to set the exposure

compensation amount, the aperture
setting for manual exposures, etc.
Turn on (9)/off the LCD panel
illumination by pressing the <U> button.
During a bulb exposure, pressing the
shutter button completely will turn off the

LCD panel illumination.

Basic Operation
> dial to set the
5
5 >
37