Energy Saving Tips - AEG U 96040-4 i Operating And Installation Instructions

An accumulation of dust will affect the performance of the appliance
and cause excessive electricity consumption. The structure of the appli-
ance permits you to clean the rear zone close to the wall, using a vac-
uum cleaner.
1. Remove the plinth (1), then the venti-
lation grid (2);
2. Carefully pull the air deflector out (3),
checking that there is no water left
from the defrosting.

Energy Saving Tips

• Do not install the appliance near boilers, radiators or other sources
of heat. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to
cool first.
• Do not leave the door open any longer than necessary.
• Do not set temperature any colder than necessary.
• Put frozen food in the fridge to defrost. The cold in the frozen food
will then be used to cool the fridge.
26