Canon T50 Instructions Manual page 25

Depress the shutter button halfway;
once the " ! " mark signals that the
flash is charged, you are ready for
flash photography.
You need not make any settings.
The aperture is automatically set for
the best exposure results. The
shutter speed is also set au-
tomatically to X-sync (1/60 sec).
If the subject is too far from the
flash, the green "P" will blink rapidly
to warn you. Move closer to your
subject in such cases.
When using "A" series
Speedlites and the 533G or
577G with the T50, the shutter
speed is set automatically to X-
sync (1 /60 sec), and the
aperture is adjusted au-
tomatically to the aperture value
of the flash as soon as the pilot
lamp glows.
25
Distributed by WWW.LENSINC.NET
It is recommended to use a
Canon flash unit on the T50.
Using a flash or flash accessory
of another make may cause the
camera to work improperly or
even possibly damage the
-
camera itself.