Self-Timer - Canon T50 Instructions Manual

14. Self-Timer

Set the selector dial to "SELF" and
focus your picture.
Hint:
When a tripod is not available, put
the camera on a table for self-timed
photography.
To start the self-timer, press the
shutter button. A beeping sound will
be emitted. The shutter will be
released automatically ten seconds
later.
The T50 sets the exposure the
moment you press the shutter
button. To ensure correct expo-
sure, be sure to look through or
cover the viewfinder when press-
ing the shutter button to avoid
stray incoming light. Also do not
stand in font of the lens.
22
Distributed by WWW.LENSINC.NET
At two seconds before shutter
release, the camera will begin to
beep at a faster rate.
If you have started the self-timer
and wish to cancel it before shutter
release, rotate the selector dial
back to "PROGRAM" or "L."
Following exposure, unless you
want to use the self-timer for the
next frame, reset the selector dial to
"PROGRAM" or "L."