Brinkmann Madison Owner's Manual page 25

Locking Caster
Hex Nut Wrench
Heat Shield Brace
Step 3
Attach back panel to left and right
leg of cart assembly using four
M6 X 12mm bolts (black) and star
washers (black).
Note: With the help of a friend, turn
the cart over. Try to minimize
the stress to the side panels.
Step 4
Attach locking casters to the bottom
of the cart. Tighten caster bolts
securely using hex nut wrench
provided in parts pack.
Note: With the help of a friend,
turn the cart to its upright
position.
Step 5
Attach rear heat shield brace using
two M6 X 12mm bolts (black) and
star washers (black).
24