Ipod™ (Optional); Playback; Searching For A Desired Song; Searching By Playlist - Alpine CDE-9850Ri Owner's Manual

iPod™ (Optional)
Rotary
encoder
SOURCE/POWER
MODE
An iPod™, iPod™ mini or iPod™ nano can be connected to the
CDE-9850Ri by using the FULL SPEED™ Connection Cable
(supplied). When the CDE-9850Ri is connected by using the cable, the
controls on the iPod™ are not functional.
About iPods™ usable with this unit
The unit can be used with third generation and above iPod™
photo, iPod™ minis or iPod™ nano. iPod™ Shuffle cannot be
used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
Third generation iPod:Ver. 2.3
Forth generation iPod:Ver. 3.0.2
iPod photo:Ver.1.0
iPod mini:Ver. 1.3
iPod nano:Ver. 1.0
• The unit cannot be used with the software versions earlier
than 22nd Feb.2005. For details about "iPod Software
Update", refer to the iPod Instruction Manual.

Playback

1
Press SOURCE/POWER to switch to the iPod
mode.
2
Press or to select the desired song.
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
20
-EN
/
6 TITLE
FUNC.
4 5
3
To pause playback, press
Pressing / again will resume playback.
• If a song is playing on the iPod when it is connected to the
CDE-9850Ri, it will continue playing after the connection.

Searching for a desired Song

An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the CDE-9850Ri can use these to ease song
searches.

Searching by Playlist

1
Press to activate the search selection mode.
2
Turn the Rotary encoder to select the PLAYLIST
search mode, then press
PLAYLIST ARTIST
3
*1
Turn the Rotary encoder to select the desired
Playlist.
4
Press / .
The selected playlist is played back.
To search for a song in the selected playlist
1 After selecting the playlist in step 3*
to the song search mode of the selected playlist.
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
• Press and hold for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled when an operation has
not been performed in 10 seconds.
• In the search mode, pressing FUNC. will return to the previous
mode.
• All songs in the iPod are played back by selecting the stored "iPod
1
name" in step 3* .
• Playlist search cannot be made during M.I.X. play.
• "NO SONG" will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.

Searching by artist name

1
Press to activate the search selection mode.
2
Turn the Rotary encoder to select the ARTIST
search mode, then press
PLAYLIST ARTIST
3
*2
Turn the Rotary encoder to select the desired
Artist.
4
Press / .
All the songs of the selected Artist are played back.
/ .
.
ALBUM SONG PLAYLIST
1
, press to change
.
ALBUM SONG PLAYLIST