Setting The Speed - Braun Multiquick professional MR 5500 User Manual

Our products are engineered to meet the
highest standards of quality, functionality and
design. We hope you thoroughly enjoy your
new Braun appliance.
Caution
Please read the use instructions carefully
and completely before using the
appliance.
• The blades are very sharp!
• Always unplug the appliance before
assembling, disassembling, cleaning or
storing.
• The appliance must be kept out of reach of
children.
• This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of electric shock, this plug will fit in
a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician. Do not modify the
plug in any way.
• Do not hold the motor part
gear box under running water, nor
I
immerse them in water.
• Braun electric appliances meet applicable
safety standards. Repairs or the
replacement of the cord must only be done
by authorized service personnel. Faulty,
unqualified repair work may cause
considerable hazards to the user.
• Before plugging into a socket, check
that your voltage corresponds to the
voltage printed on the bottom of the ap-
pliance.
• The appliance is constructed to process
normal household quantities.
• Be advised that the maximum rating of this
appliance is based on the «HC» chopper
attachment which draws the greatest
power consumption. The other recom-
mended attachments may draw signifi-
cantly less power.
• Neither the beaker
bowl (c) is microwave-proof.
Description
Motor part
A
On/off switch for variable speed
B
On/off switch for turbo speed
C
Quick release buttons
D
Variable speed regulator
E
Blender shaft
F
Wall mount
G
Measuring beaker with airtight lid
H
Whisk gear box
I
Whisk
J
Chopper
K

Setting the speed

When activating the on/off switch
processing speed corresponds to the setting
of the variable speed regulator
the setting, the faster the chopping results.
However, maximum processing speed can
only be achieved by pressing the turbo
switch . You may also use the turbo switch
C
for instant powerful pulses without having to
adjust the variable speed regulator.
Depending on the application, we
recommend the following speed settings:
Handblender 1...turbo
Chopper 1...turbo
Whisk 3...9
How to operate your handblender
The handblender is perfectly suited for
preparing dips, sauces, soups, mayonnaise
and baby food as well as for mixing drinks
and milk shakes.
1. Insert the motor part
5
or the whisk
A
, nor the chopper
H
, the
B
. The higher
E
into the blender
A
shaft until it locks into place.
F
2. Position the handblender deep in the
container being used to prepare your food
or drink, then press the on/off switch
the on/off turbo switch
3. To release the blender shaft after use,
press the release knobs
You can operate the handblender in the
measuring beaker or in any other container.
When blending directly in the saucepan while
cooking, remove the pan from the burner
first to protect your handblender from over-
heating.
How to operate your whisk
Use the whisk only for whipping cream, beat-
ing egg whites and mixing instant puddings.
1. Insert the whisk
box , then insert the motor part
I
the gear box until it locks into place.
2. Place the whisk in a bowl before pressing
the on/off switch
3. To release the wisk, press the release
knobs and pull off the gear box. Then
D
pull the whisk out of the gear box.
For best results:
• Use a wide container.
• Only whip up to 400 ml (14 oz) chilled
cream at one time.
• Only whip up to 4 egg whites at one time.
• Move the whisk clockwise when mixing
ingredients.
How to operate
your chopper
attachment
(a) Chopper gear box
(b) Blade
(c) Chopper bowl
(d) Anti-slip base/lid
The chopper is perfectly suited for chopping
meat, cheese, onions, herbs, garlic, carrots,
walnuts, hazelnuts, almonds etc.
For chopping hard foods (e.g. parmesan
cheese, chocolate), use the on/off turbo
switch .
C
N.B.: Do not chop extremely hard food, such
as ice cubes, nutmeg or coffee beans.
Before chopping...
• cut meat, cheese, onions, garlic, carrots
into small pieces (see table page 3)
• remove stems from herbs, shell nuts
• remove bones and gristle from meat.
1. Caution: Carefully remove the plastic
cover from the blade. The blade is very
sharp!
Always hold it by the upper plastic part.
Place the blade on the center pin of the
chopper bowl (c). Press it straight down
until it locks into place.
Always place the chopper bowl on the
anti-slip base (d).
2. Place the food in the chopper bowl.
3. Put the gear box (a) on the chopper bowl.
4. Insert the motor part
until it locks into place.
5. Press either switch
chopper. During processing, hold the
motor part with one hand and the chopper
bowl with the other.
6. After use, press the release knobs
detach the motor part.
7. Then remove the gear box.
8. Carefully take out the blade.
9. Then remove the processed food from the
chopper bowl. The anti-slip base also
serves as an airtight lid for the chopper
bowl.
to begin.
C
and pull it off.
D
into the whisk gear
J
A
to turn on the whisk.
B
into gear box (a)
A
or to operate the
B C
D
or
B
into
a
b
c
d
to