Brother PT-MT (P-touch mini ' tech Service Manual page 36

2) Press the Enter key.
LCD check screen 1 will appear as shown below.
3) Press the Enter key.
LCD check screen 2 will appear as shown below.
4) Press the Enter key.
LCD check screen 3 will appear as shown below.
DIAL submode (Dial position 2 and Enter key*)
(*In any other submode, setting the select dial to Dial position 2 and pressing the Enter key
will jump to DIAL submode.)
1) When LCD check screen 3 is displayed, press the Enter key.
The machine shows the following and enters DIAL submode.
2) Make sure that the select dial is placed in Dial position
position, turn the select dial to Dial position
3) Press the Enter key.
"0" will display as shown below.
(All guidance indicators & cursors: ON)
(All guidance indicators & cursors: ON)
.
III - 21
. If it is in any other