Upper Adf Chute - Brother MFC5100C Service Manual

Upper ADF chute

(6) Remove the two screws from the upper ADF chute.
(7) Open the document tray ( ).
(8) From the underside of the document tray, release the two leftmost latches ( ) and then pull
up the left end of the upper ADF chute ( ).
Reassembling Note: When latching the upper ADF chute, first fit tabs (1) of the right end
into the openings provided in the document tray, then press latches (2), (3), and (4) into place
in this order as shown above.
4 -1 5