Improving Copy Quality; Sorting Copies Using The Adf; Adjusting Contrast And Brightness - Brother FAX-2890 Advanced User's Manual

Chapter 7

Improving copy quality

You can choose from a range of quality
settings. The default setting is Auto.

Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.

Text
Suitable for documents containing mainly
text.

Photo
Better copy quality for photographs.

Graph
Suitable for copying receipts.
To temporarily change the quality setting,
follow the steps below:
a
Make sure you are in COPY mode
.
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options.
Press a or b to choose Quality.
Press OK.
e
Press a or b to choose Auto, Text,
Photo or Graph.
Press OK.
f
Press Start.
To change the default setting, follow the
steps below:
a
Press Menu, 3, 1.
b
Press a or b to choose the copy quality.
Press OK.
c
Press Stop/Exit.
34

Sorting copies using the ADF

7
You can sort multiple copies. Pages will be
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a
Make sure you are in COPY mode
.
b
Load your document in the ADF.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options.
Press a or b to choose Stack/Sort.
Press OK.
e
Press a or b to choose Sort.
Press OK.
f
Press Start.
Adjusting Contrast and
Brightness
Contrast
Adjust the contrast to help an image look
sharper and more vivid.
To temporarily change the contrast setting,
follow the steps below:
a
Make sure you are in COPY mode
.
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options.
Press a or b to choose Contrast.
Press OK.
e
Press d or c to increase or decrease the
contrast.
Press OK.
7
7
7