8 ] Installing The Tape Cassette, The Batteries, And The Cassette Cover Assy - Brother P-touch PT-1180 Service Manual

[ 8 ] Installing the tape cassette, the batteries, and the cassette cover ASSY
(1) Hook "A" of the cassette cover is set at the boss of bottom cover. The cassette is installed,
thereafter, at the "B" section by applying a force (sliding torque) toward "C".
(2) Install the holder cam to the cassette cover.
Caution1: Insert the holder cam into the cassette cover correctly. Check that the holder cam is
not removed easily.
Caution2: After checking that the "D" section on the cassette cover is not deteriorated or
damaged, install the holder cam into the cassette cover.
(3) Load the tape cassette.
(4) Put the batteries in the bottom cover.
Batteries
Fig. 2.2-30 Installing the Tape Cassette, the Batteries and the Holder Cam
"B"
Fig. 2.2-29 Installing the Cassette Cover
II- 26
Cassette cover ASSY
"C"
Bottom cover
"D"
Holder cam
Tape cassette
PT2002008
"A"
Boss