Cruise Set Indicator Light - Mazda 2004 MPV Owner's Manual

M Cruise Set Indicator Light
This light comes on when a cruising speed
is set.
M Activation/Deactivation
To activate the system, press the ON/OFF
switch.
The cruise main indicator light
illuminates.
To deactivate the system, press the switch
again.
The cruise main indicator light turns off.
Starting and Driving
WARNING
Cruise Main Switch:
Leaving the ON/OFF switch on when
not using the cruise control is
dangerous as it may be switched on
accidentally. This could result in loss
of vehicle control. Keep the ON/OFF
switch off when cruise control is not
in use.
M To Set Speed
1. Activate the cruise control system.
2. Accelerate to the desired speed, which
must be more than 40 km/h (25 mph).
3. Press the SET/COAST button and
release it at the speed you want.
Release the accelerator at the same
time.
Don't continue to hold in the button.
Until you release it, speed will
continue to drop (unless you continue
to accelerate) and you'll miss the
desired speed.
Driving Your Mazda
5-15