To program the Park Unlock mode:
Unlock mode:
Unlocks driver's door or all doors when
the shift lever is moved to Park (P).
1.
Make sure the shift lever is in
Park (P), and close the driver's
door.
Turn the ignition switch to the ON
2.
(II) position.
If equipped
3.
Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a
clicking sound. Continue to hold
down the switch:
Until you hear a second click
(after
about 5 seconds) to
activate the driver's door unlock
feature.
Or, until you hear a third click
(after about 10 seconds) to
activate the all door unlock
feature.
4.
Release the switch, and turn the
ignition switch to the
ACCESSORY
(I)
position within 5 seconds.
Door Locks
To program the Ignition Sw itch
Unlock mode:
Unlocks driver' s door or a l l doors when
the ignition switch is out of the ON (II)
position.*
Make sure the shift lever is in the
1.
Park (P) position.
Apply the parking brake, and close
2.
the driver's door.
Turn the ignition switch to the ON
3.
(II) position (do not start the engine).
CONTINUED
87