Technical Specifications; Installation; Positioning - Firenzi FRF 120 Instruction Booklet

Firenzi refrigerator frf 120 instruction booklet
Table of Contents

Advertisement

Technical Specifications

DIMENSIONS
POWER SUPPLY VOLTAGE AND FREQUENCY
TOTAL POWER ABSORBED
AVERAGE DAILY UNITS ELECTRICITY(*)
TOTAL GROSS CAPACITY
NET CAPACITY
NET CAPACITY
STAR RATING
(*)This figure is based on standard test results in accordance with European Standard EN153. Actual
consumption will depend on how the appliance is used and where it is located.

Installation

Warning
IF YOU ARE DISCARDING AN OLD
APPLIANCE THAT HAS A LOCK OR CATCH
ON THE DOOR, YOU MUST ENSURE THAT
IT IS MADE UNUSABLE TO PREVENT
YOUNG CHILDREN BEING TRAPPED
INSIDE.
Depending upon the position which you choose for
your appliance, you may wish to reverse the way in
which the door opens. To do this, refer to instructions
under ÒDoor reversalÓ.

Positioning

The appliance should only be installed at a location
where the ambient temperature corresponds to the
climate classification indicated on the rating plate,
which is located on the inside
The following table shows which ambient
temperature is correct for each climate classification.
SN
+10¡C to +32¡C
ST
+18¡C to +38¡C
The appliance should be located in a dry
atmosphere, out of direct sunlight and away from
continuous heat and extreme temperature, e.g. not
next to a boiler or radiator or in a very cold room e.g.
an outhouse. If these temperatures are exceeded i.e.
warmer or colder, then the appliance may not
operate correctly.
12
Fridge
compartment
right of the appliance.
Height
Width
Depth
220-240 V / 50 Hz
80 W
0,75 kWh
122 l
103 l
17 l
For building-in and door reversal instructions please
refer to the relevant instructions on the following
pages.
Important
It must be possible to disconnect the appliance
from the mains power supply; the plug must
therefore be easily accessible after installation.
81,5
cm
59,6
cm
54
cm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents