Summary of Contents for Black Box Active Star Hub IC207A
Page 1
Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX SUPPORT FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
Page 2
IC207A/8A-Manual 7/12/00 9:31 AM Page 1 SAFETY Safety READ THIS FIRST! 1. Do not connect the Active Star Hubs to any type of public network. 2. Do not connect any outdoor cabling to the Active Star Hubs without proper lightning protection. 3.
Page 3
IC207A/8A-Manual 7/12/00 9:31 AM Page 2 ACTIVE STAR HUB FEDERAL COMMUNICATIONS COMMISSION INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication.
Page 4
IC207A/8A-Manual 7/12/00 9:31 AM Page 3 NOM STATEMENT NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
Page 5
IC207A/8A-Manual 7/12/00 9:31 AM Page 4 ACTIVE STAR HUB 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
Page 6
IC207A/8A-Manual 7/12/00 9:31 AM Page 5 TRADEMARKS TRADEMARKS USED IN THIS MANUAL ® and AS/400 ® are registered trademarks of International Business Machines Corporation. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
IC207A/8A-Manual 7/12/00 9:31 AM Page 7 CHAPTER 1: Specifications 1. Specifications Number of Host Ports—2 Number of Device Ports—14 Data Rate—1 Mbps Protocol—IBM 5250 Indicators—(17) LEDs: (1) Power, (2) Host Port Activity, (14) Device Port Activity Connectors—IC207A: (16) RJ-11; IC208A: (16) RJ-45 Active Pair—Configurable Maximum Distance—Controller to Hub: Up to 2000 ft.
® 5250 PC emulation. With the Active Star Hub from Black Box, you’re guaranteed an upgrade path (via firmware) to the new protocol for far less cost than completely replacing the hub. The Hub is a state-of-the-art dual active star that has two host-port connections and 14 device-port connections.
• Active Star Hub RJ-11 (IC207A) or Active Star Hub RJ-45 (IC208A) • 100-240 VAC input external power supply (attached to Hub) • This users’ manual If anything is missing or damaged, please contact Black Box at 724-746-5500. CAUTION Do not apply power to any damaged component! 2.4 Typical Application...
IC207A/8A-Manual 7/12/00 9:31 AM Page 10 ACTIVE STAR HUB 3. Active Pair Setup IMPORTANT! If you haven’t already done so, please read the safety guidelines listed on page 1. The factory default active pair setting for the Active Star Hub is pins 4/5. The default and other possible configurations are shown on the identification label located on the rear panel.
Page 12
IC207A/8A-Manual 7/12/00 9:31 AM Page 11 CHAPTER 3: Active Pair Setup RJ/11 3/4 RJ-11 RJ-45 RJ-45 RJ-45 Normal Polarity Reverse Polarity Figure 3-2. Active Pair Jumper Settings. 6. To reinstall the top cover, tilt the top cover down. Slide the top cover forward until it mates completely with the bottom cover.
Page 13
IC207A/8A-Manual 7/12/00 9:31 AM Page 12 ACTIVE STAR HUB Figure 3-5. Jumper Setting for Normal Polarity: RJ-11 pins 2 and 5 or RJ-45 pins 3 and 6. Figure 3-6. Jumper Setting for Reverse Polarity: RJ-11 pins 2 and 5 or RJ-45 pins 3 and 6.
IC207A/8A-Manual 7/12/00 9:31 AM Page 13 CHAPTER 4: Indicators and Connectors 4. Indicators and Connectors Active Star Hub POWER Device Host Device Host Power Activity LED Activity LEDs Activity LEDs Activity LED connection connections connections connection Figure 4-1. Front Panel of the Hub. Table 4-1.
Rack hardware is not provided. (For more information on rack hardware that will work with this unit, call Black Box Technical Support at 724-746-5500.) We recommend that you use plastic or nylon washers under mounting screws to protect the Hub’s finish.
• Verify that the AC outlet is functioning correctly. If the problem persists, observe the status of the external power supply’s LED and contact Black Box Technical Support at 724-746-5500. A device is down or unstable. • Verify that the host’s device type matches the device.
Page 17
IC207A/8A-Manual 7/12/00 9:31 AM Page 16 ACTIVE STAR HUB • Verify that the cable distance does not exceed the Active Star Hub’s specification. • Verify that the cable is data grade. • Verify that the wiring uses natural pairs. • Verify that the wiring avoids sources of environmental noise. •...