Olympus Tough TG-820 iHS Instruction Manual page 17

Shooting, Playback, and Erasing Shooting, Playback, and Erasing
Shooting with the optimum aperture
value and shutter speed (P mode)
In this mode, automatic shooting settings are activated
while also allowing changes to a wide range of
other shooting menu functions, such as exposure
compensation, white balance, etc. as needed.
The default settings of the function are highlighted in
.
1
Press the n button to turn on the camera.
Number of storable still pictures (p. 67)
If P mode is not displayed, press H to display the
function menu screen and then set the shooting
mode to P. "Using the Menu" (p. 8)
P mode indicator
AUTO AUTO
AUTO AUTO
12
4 4 N
00:34 00:34
ORM
Monitor (standby mode screen)
Current shooting mode display
P P
Program Auto
2
Hold the camera and compose the shot.
P P
0.0 0.0
WB WB
ISO ISO
M
When holding the camera, take care not to cover the
fl ash and microphone with your fi ngers, etc.
3
Press the shutter button halfway down to
focus on the subject.
●
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
●
The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
12
M
MENU MENU
Monitor
Horizontal grip
Vertical grip
17
EN