Removing The Front Bezel - Lenovo J200 Hardware Installation And Replacement Manual

2. Remove the front bezel by releasing the three plastic tabs on the left side and
pivoting the bezel outward. Carefully set the bezel to the side without
disconnecting the power switch and LED assembly cable.
Figure 8. Removing the front bezel
3. To reinstall the bezel, align the plastic tabs on the right side of the bezel with
the corresponding holes in the chassis, then pivot it inward until it snaps into
position on the left side.
4. To complete the installation, go to Chapter 4, "Completing the parts
replacement," on page 47
Chapter 3. Installing options and replacing hardware
15