Replacing The Mouse - Lenovo IdeaCentre K330B Hardware Replacement Manual

Replacing the mouse

To replace the mouse:
1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut
down the computer, and turn off all attached devices.
2. Unplug all power cords from electrical outlets.
3. Locate the connector for the mouse. Refer to "Locating connectors on the
front of the computer" and "Locating connectors on the rear of the computer".
Note: Your mouse may be connected to the standard mouse connector
the rear of the computer or to a USB connector
of the computer.
4. Disconnect the defective mouse cable from the computer.
5. Connect the new mouse cable to the connector.
6. Refer to the "Completing the installation".
36
Hardware Replacement Guide
at either the front or rear
at