1-8
C
1: I
HAPTER
NSTALLING THE
Removing or
Installing the Flash
Memory Drive Cover
DPE M
ODULE
You must install the flash memory drive cover to ensure emissions compliance.
To install a flash memory card, remove the cover as shown:
After installing the flash memory card, attach the cover as shown:
Remove screw
Slide cover toward right of
front panel and pull cover
toward you to remove from
front panel.
Match notches with slots
Install screw. Do not
tighten all the way.
Slide cover toward center of
front panel until screw fits in
the narrow end of the slot.
Tighten screw. Do not
overtighten.