Interface Attributes; Interface Leds - 3Com 3C13886 - Router OC-3 ATM SML Flexible Interface Card Installation Manual

3Com Router Module Guide

2.7.3 Interface Attributes

The interface attributes of Router 1-Port FXS/FXO SIC and Router 2-Port FXS/FXO
SIC are given in the following table:
Table 2-16 Interface attributes of Router 1-Port FXS/FXO SIC and Router 2-Port FXS/FXO SIC
Connector type
Number of connectors
Interface standard
Cable type
Dialing mode
Bandwidth

2.7.4 Interface LEDs

Router 1-Port FXS/FXO SIC panel
Figure 2-27 Router 1-Port FXS SIC panel
Figure 2-28 Router 1-Port FXO SIC panel
Attribute
RJ11
1 (Router 1-Port FXS/FXO SIC)
2 (Router 2-Port FXS/FXO SIC)
Subscriber circuit interface (Router 1 or 2-Port FXS SIC)
compliant with ITU Q.512.
Loop trunk interface (SIC-1FXO/SIC-2FXO) compliant with ITU
Q.552.
Over-current and over-voltage protection compliant with ITU
K.20
Telephone cable with ferrite core.
Supports DTMF, does not supports pulse dial-up.
300 to 3400Hz
Chapter 2 Smart Interface Cards
Description
2-27