Hardware Description; Top Panel - NETGEAR WNDAP360 Reference

ProSafe Dual Band Wireless-N Access Point WNDAP360
The wireless access point incorporates Auto Uplink technology. The Ethernet port
TM
automatically senses whether the Ethernet cable plugged into the port should have a
"normal" connection such as to a computer or an "uplink" connection such as to a switch or
hub. That port then configures itself correctly. This feature also eliminates any concerns
about crossover cables, as Auto Uplink accommodates either type of cable to make the right
connection.

Hardware Description

This section describes the top and rear hardware functions of the ProSafe Dual Band
Wireless-N Access Point WNDAP360.

Top Panel

The ProSafe Dual Band Wireless-N Access Point WNDAP360 LEDs are described in the
following figure and table:
1 2 5
4
3
Figure 1.
Introduction
11