Using A Wps Button To Connect To A Wireless Network - NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0 Adapter User Manual

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual

Using a WPS Button to Connect to a Wireless Network

To join a network using a push button:
1. Click the icon to open the Smart Wizard. On the status bar, click Join a Network. The
adapter detects a network with WPS:
Figure 2-3
Note: If you are not sure if your router supports WPS, select No to connect. If your
router does not support WPS and you select Yes, the router or access point
connection will time out and no wireless network connection will be
established.
2. If your router supports WPS, select Yes, and then click Next.
3. Select Yes (to use a push button), and then click Next.
4. Log in to the access point or router that you have selected.
5. From the router's main menu, select Add WPS Client. On the Add WPS Client screen, select
Push Button.
6. To start the WPS process, either press the push button on the access point or router, or click the
icon on the router's Add WPS Client screen.
v1.0, June 2009
2-5