Using The Smart Wizard To Connect To A Wireless Network - NETGEAR WNA1000M User Manual

Click Next. The Smart Wizard software detects the adapter.
2.
Follow the onscreen prompts to install the driver and complete the installation.
3.
How you connect to a network depends on what you selected during custom installation.
If you installed the Smart Wizard with automatic configuration, see the following
•
section, Using the Smart Wizard to Connect to a Wireless
If you installed the Smart Wizard with manual configuration, the Settings tab displays.
•
See
Viewing Wireless Networks in Your Area
To use a Windows utility, see your Windows documentation or the NETGEAR
•
application note at
http://documentation.netgear.com/reference/enu/winzerocfg/index.htm.

Using the Smart Wizard to Connect to a Wireless Network

After the software is installed, you are prompted to connect to a wireless network.
One of the following screens displays:
1.
WPS network
WPS network: A network in your area supports Push 'N' Connect (also called WPS).
•
Click Next, and follow the prompts to push the WPS button on your adapter and
connect without entering a password.
No WPS networks: Select a wireless network from the list and click Next. To connect
•
to a secure network, you must enter its passphrase or network key.
10 | Chapter 1: Getting Started
N150 Wireless Micro USB Adapter WNA1000M
Network."
on page 17.
No WPS networks