Installing Stand Base; Uninstalling Stand Base; Wall Mounting (Not Supplied) - Panasonic Viera TH-L24X5A Operating Instructions Manual

Installing Stand Base

1. Place the LCD TV screen facing down on a flat surface place
where maintained with soft materials (such as a blanket)
for protecting the display screen.
2. Use the assembly screw to fasten the neck to the base
securely.
3. Use only the supplied assembly screws to fasten the stand
securely to the TV.

Uninstalling Stand Base

1. Place the LCD TV screen facing down on a flat surface place
where maintained with soft materials (such as a blanket)
for protecting the display screen.
2. Remove screws in two holes with screw driver.
6

Wall Mounting (Not supplied)

Use the screws that are threaded into the stand-mounting
inserts on the back of your LCD TV to secure it to a Wall
Mounting kit.
Note:
Wall Mounting kit is not supplied.
It is safe to use long screws for this product.
When using long screws, the two bottom screws may come
loose, But the top two will remain tight in place, so it will not
fall off the wall.
VESA standard interface
75 x 75 mm
Mounting screws measurements:
Mounting Screws
M4 Diameter, Length -
6mm (min.); 7mm (max.)
Wall-hanging bracket (Optional)
Please contact your nearest Panasonic dealer to purchase the
recommended optional accessories.
For additional details, please refer to the manual of the
optional accessories.
•
U sing other wall-hanging brackets, or installing a wall
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the unit's
performance and safety, be absolutely sure to ask your
dealer or a licensed contractor to secure the wall-hanging
brackets. Any damage caused by installing without a
qualified installer will void your warranty.
•
D o not mount the unit directly below ceiling lights (such
as spotlights, floodlights or halogen lights) which typically
give off high heat. Doing so may warp or damage plastic
cabinet parts.
•
T ake care when fixing wall brackets to the wall. Always
ensure that there are no electrical cables or pipes in the wall
before hanging bracket.
•
T o prevent fall and injury, remove the TV from its fixed wall
position when it is no longer in use.
Depth of screw : 7 mm
Diameter : M4
Screw for xing the TV onto
the wall-hanging bracket
(not supplied with the TV)
(View from the side)
A
Distance between TV
and wall(A)
10 cm