Technical Information - Panasonic Viera TH-L32X50Z Operating Instructions Manual

Technical Information

Channel Allocation (Analogue TV mode)
CH 1 - CH 11
Rating (Digital TV mode)
Stereo / Bilingual Sound Selection (Analogue TV mode)
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the
Sound Selection button.
Audio Signal
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of
broadcast
Mode Indicator
A2 (German) .......Used in Australia, Malaysia etc.
Type of
broadcast
Mode Indicator
● If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
●
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
●
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using the
Sound Selection button.
●
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
ed
.)
th-l32x50z_book.indb 63 th-l32x50z_book.indb 63
CH 21 - CH 70
Rating
No Block
G
PGR
AO
STEREO
Regular broadcast
(Standard Audio)
No Indicator
Regular broadcast
(Standard Audio)
No Indicator
CH Display / Receive Channel
CH 74 - CH 78
Not classified
Parental Guidance Recommended
Adults Only
MAIN I
Regular + NICAM MONO I
(MAIN I )
BILINGUAL or DUAL MONO:
MAIN I / SUB II
CH 80 - CH 120
Meaning
General
SUB II
NICAM NICAM DUAL MONO
STEREO (MAIN I / SUB II )
I
STEREO
MONO
II
63
2/27/2012 3:10:15 PM 2/27/2012 3:10:15 PM