Panasonic Viera TH-L32X50Z Operating Instructions Manual page 15

Setup the wireless LAN connection
Setup the wireless LAN connection to enable the network service functions.
● To setup the wireless LAN connection, the wireless LAN Adaptor (optional accessory) is required.
For the information about the Wireless LAN adaptor
● Confirm the encryption key, settings and positions of your access point before starting setup.
For details, read the manual of the access point.
● Please note that this TV does not support wireless public access points.
Connect the Wireless LAN Adaptor to the USB 1 or 2 port
1
(13)
Select [Yes]
2
Start wireless LAN connection setup?
Please connect the wireless LAN adaptor to a USB terminal.
Select the connection type
3
Connection Type
Please select network connection type.
■
[WPS(Push button)]
WPS(Push button)
TV
1) Please press the 'WPS' button on the access 1) Please press the 'WPS' button on the access
point until its light flashes.
point until its light flashes.
2) When the light is flashing select 'Connect' on
2) When the light is flashing select 'Connect' on
TV. TV.
g
If you are unsure, please check the instruction
If you are unsure, please check the instruction
manual of the access point.
manual of the access point.
■
[Search for access point]
Access points found automatically are listed.
Available Access Points
No.
1
2
3
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
Access Point Settings
Encryption key
A B C D E F G H
U V W X Y Z
a b c d e
u v w x
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select 'Yes' to confirm.
Select 'No' to change.
Wireless LAN connection setup is completed
●
If failed, check the encryption key, settings or positions of your access point.
●
If connection to the access point is successful, we recommend you perform the [Connection Test] (p. 51).
th-l32x50z_book.indb 15 th-l32x50z_book.indb 15
Yes No
WPS(Push button)
Search for access point
Connect
SSID Wireless type Encrypt Reception
Access Point A 11n(2.4GHz)
Access Point B 11n(5GHz)
Access Point C 11n(5GHz)
I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
f g h i j k l m n o p q r s t
y z ( ) + - . * _
Yes No
Read the manual of the access point.
"Optional accessories" (p. 6)
select
confirm
●
If your access point supports WPS (Push button),
select
then select this option. If not, select [Search for
access point].
confirm
Press the WPS button on the access point until the light flashes. And
then, press the OK button to connect the Wireless LAN Adaptor and the
access point.
● Ensure that your access point supports WPS for this method.
● WPS: Wi-Fi Protected Setup™
1
Select your desired access point
select
●
To search access points again
●
For the information of the
access
highlighted access point
2
Access the encryption key input mode
●
If the selected access point is not encrypted, the confirmation screen
will be displayed. It is recommended to select the encrypted access
point.
3
Enter the encryption key of the access point
(Set characters one by one)
select
Store
set
●
You can set characters by using numeric buttons.
4
Select [Yes]
select
set
● To re-enter the encryption key, select [No].
Y
INFO
RETURN
2/27/2012 3:09:37 PM 2/27/2012 3:09:37 PM
15