Bissell Steam Mop 90T1 SERIES User Manual page 5

A
ssembly
Your Steam Mop assembles quickly
and easily. The only thing you will
need for assembly is a Phillips head
screwdriver.
Your Steam Mop is packaged with
the following items:
Handle Assembly
Lower Body with Water Filter
Maneuverable Swivel Head
Removable Water Tank
1 large Phillips Head Screw taped to
the handle
1 small Phillips Head Screw taped to
the handle
2 Microfiber Mop Pads
1. Attach lower body to maneuverable
swivel head.
2.
Secure maneuverable swivel head
with small Phillips head screw. Tighten
until secure.
3. Slide handle assembly down into
lower body until it will go no further.
4. Secure the handle by placing the
large Phillips head screw through the
screw opening in the lower body and
into the rear of the handle assembly.
Tighten with screwdriver until secure.
5. Slide water tank onto lower body by
lining up vertical glides and gently
sliding tank into place.
Steam Mop assembly is now complete.
w w w . b i s s e l l . c o m
Handle Assembly
Lower Body
Maneuverable Swivel Head
Removable
Water Tank
2
1
3 4
5
Large Screw
Small Screw
2 Microfiber Mop Pads
5