Advertisement
Quick Links
Download this manual
See also:
Installation Manual
REMOTE START SECURITY SYSTEM
O W N E R S M A N U A L
Standard Features
The System has the following standard features:
• 5-button remote transmitter
• Status indicator (LED)
• Valet/Service mode switch
• Remote Start capabilities
• Extended Range Receiver
• Multi-tone siren (120dB)
• Dual stage impact detector
• Remote panic
• Valet mode
• Remote chirp delete
• Remote sensor bypass
• Passive or active arming
• Stop & Go Feature
• Auto Cold Start
• Flashing parking lights
• Auto Rearm
• Passive/Active Arming
Optional Features
This System has many optional features that may
require additional parts and/or labor. Please contact
your dealer for more details.
• Remote keyless entry (Door lock/unlock)
• Illuminated entry
• LCD FM 2-way Remote
• Hood & trunk protection
• Horn honk
• Trunk/hatch release
• Window roll-up
• Back up battery
• Additional sensors: glass breakage/microwave
Note: Some features may not be appropriate for
certain vehicles. Automatic transmission and
electronic fuel injection are required. on vehicles for
use with this system.
REMOTE TRANSMITTER FUNCTIONS
Button 1
Button 3
Transmitter
Button 1 Arms the system and locks the
doors*.
Button 1 also activates the Panic
feature.
Button 2 Disarms the system and unlocks the
doors*.
Button 3 Activates the optional Trunk Release
feature*.
Button 4 Activates the Remote Start Feature.
Button 5 Auxiliary Shift Key.
Buttons 5 then 4 Activates the 2nd auxiliary
function.
*
Optional Feature
1
Button 2
Button 5
Button 4
5-Button
Advertisement
Related Manuals for Black Widow Security BW FM 6150
Summary of Contents for Black Widow Security BW FM 6150
-
Page 1: Standard Features
REMOTE START SECURITY SYSTEM O W N E R S M A N U A L Standard Features Note: Some features may not be appropriate for certain vehicles. Automatic transmission and electronic fuel injection are required. on vehicles for The System has the following standard features: use with this system. -
Page 2: Security System Operation
Security System Operation † If the Passive Locking feature was enabled during installation. ARMING OPERATION DISARMING OPERATION To arm the system press transmitter button 1: To disarm the system press transmitter button 2. • The siren will chirp once. • The siren will chirp twice.¥ •... -
Page 3: Ignition Lock
CHIRP DELETE the security system will be disabled. For full time silent operation, the ARM/ DISARM However, the optional keyless entry and trunk chirps can be permanently disabled. This feature release and remote start features will still must be programmed during installation. function if installed. -
Page 4: Remote Start Operation
system is disarmed and rearmed. the remote transmitter. Enter vehicle, turn ignition key to the on position (Note: Do not OPTIONAL SECURE turn the key all the way to the start position as OVERRIDE CODE you may damage the starter). If your system was programmed to override with a personal override code-pressing the Once the ignition key is turned to the on... -
Page 5: Stop And Go
Disengaging the Auto Cold Start feature: To resume driver control: The Auto Cold Start feature can be 1. Unlock the doors manually or by deactivated in one of three ways: pressing transmitter button 2*. • Press the brake pedal. 2. Turn on the ignition. •... - Page 6 SYSTEM REFERENCE INDICATORS STATUS INDICATOR (LED) FUNCTIONS PARKING LIGHTS FUNCTIONS On Solid = Valet Mode On Solid = Vehicle Remote Starting Slow Flash = System Armed Flash 1x = System armed Rapid Flash = Passive Arming TAMPER ALERT LED FUNCTIONS Flash 2x = System disarmed 1 flash = sensor #2 Flash 3x = Tamper indication (after disarming)